Base DTM Map Cross Sections Setting Out Drainage Manager Drainage is designed to understand the needs of the onsite drainage engineer. Drainage manager offers tender, interin and final measures along with setting out, QA sheets, stock control and asbuilt records. Manholes and gullies can be added from known coordinates or derived from an alignment string based on schedules provided by the designer. A range of standard blue book manhole types are included which can be added to or customised. Pipe runs are added by dragging the cursor between manholes and by selecting a trench type. A clash analysis can be run to check the integrity of the design and will highlight any potential errors in the layout so amendments can be made. Stock can be tracked throughout the job by accessing the stock database. The stock database lists the required components including pipes, rings, slabs, lids, combined kerb drains, fin drains etc. Setting out information can be generated by simply selecting the required pipe run. Manhole detail sheets together with the pipe run and connections can be printed out to give to the onsite drainage gang. Asbuilt survey data can be entered into the system. This keeps a separate record to the design containing all the asbuilt information ready to compare to the tenders. Measures can be broken down into any category. Measure the design or the asbuilt. Volume measures are fully customisable but as a default it complies with the MMHW standard.